ABT, Inc. • PO Box 837 • 259 Murdock Road • Troutman, NC 28166
(800) 438-6057 • (704) 528-9806 • Fax: (704) 528-5478

> PolyDrain > Components > End Plates and Adapters

End Plates & Pipe Adapters

End plates to cap the end of the channels are available for each of the different product lines. Pipe stubs or pipe adaptors are installed in some of the end plates to facilitate the connection with the pipe. Pipe adaptors for vertical discharge are also available.

Closed end plates are stocked to fit all 100 mm (4") channels from size 010 to 300 PWII. Reference System Design Diagram to determine correct part number.

Vertical Outlet Pipe Adapters are stocked to fit channel numbers 050, 100, 150, 200, 250, and 300 in 4" Sch 35, 4" Sch 40 and 6" Sch 35 pipe sizes.

Horizontal Outlet End Plates are stocked for the same channel numbers with and without PolyWalls.

Horizontal Inlet End Plates and non-stocked Horizontal Outlet End Plates are available to order.

Closed end plates

Vertical outlet

150mm (6") Horizontal outlet plates

100mm (4") Horizontal inlet end plates